My Stablemate scale Shetland ponies are now available in Micro-Mini scale!  Here we have a group of variations on a 10h (40inch) tall Shetland pony, landing from an epic leap over a choice of obstacles.

These models are Micro-Mini (approx. 1:64) scale.

• Honey is a well-groomed Shetland pony landing from a jump, he may be in a school carrying his ambitious young rider, or having fun out in the field with his herd.  Supplied with a plain (grass textured) base to allow full focus to be on the pony.
• Flower is also well groomed, sporting a tidy clip in order to keep him cool as he tears around the circuit at the famous, adorable and slightly hilarious Shetland Grand National.  Supplied with a rectangular base (to allow for stacking if you want to put several ponies together), with a section of a typical jump from this race.
• Bumble is a real rebel, he's an outdoor type with a full winter coat and he's discovered a gap in the stone field wall - he's wasting no time at all escaping and I've no doubt he's off to get up to all manner of mischief!
• Pollen is a party girl!  The only girl in the gang, she adores her little humans almost as much as they adore her!  Pollen loves nothing better than to have her mane and tail all coloured up (with non-toxic dyes, of course!) and plaited by her devoted fans.  Pollen is a dream pony, she takes care of her little people when they have fun, and she loves them doting on her too.  Pollen is supplied with a black FDM 3D printed plain oval base with a slight texture.

Edition Info:  Limited to 200 copies total including all variations.

Production: This edition is 3D printed.  These models are 3D printed in a top quality Formlabs grey resin (note, photos show the models with a coat of black primer, they are supplied grey), with Pollen printed in an extra-tough dark grey resin as her tiny plaits and bows are ridiculously delicate, though surprisingly tough thanks to the special resin.  These little potato-shaped ponies standing on two legs are quite tough but will break if the legs are forced or twisted in the bases.  This resin does have a slight shine to the surface, which shows in the crevices after I've cleaned the model (the shine reduced after scrubbing, hence the crevices remaining shiny), so please don't worry if you see shiny spots on these models, it is the nature of the resin (they are VERY thoroughly cleaned!).  Please take care when taking the model's pegs in and out of the base, they are tough but will break if forced.

Models are supplied clean, in that as much evidence from 3D printing as possible will be removed.  I can't guarantee you won't find some small remnants, but I do my very best for you and hope you'll find them very easy to prep ready for paint.

Lead times / shipping: I have some of these these models in stock but may need to clean them (ie remove 3D printing nibs etc) prior to shipping, which is done in batches, and some models will be printed to order so please allow approx. 4-8 weeks for shipping.  Shipping costs apply to all orders and will be invoiced when ready to ship, see my Shipping Policy page for more info.

Please select the option below to see pricing, prices vary on each of these models due to the differing requirements each needs in terms of clean-up and printing costs.

Please make a selection below to see pricing and to order: