Unicorn Horns
These Unicorn Horns are 3D printed in a resin mixture designed to give excellent strength for their sizes - please note they are not unbreakable, the smallest horn is the most delicate given it's fine size and design. These are not toys and should not be used by children.
Horns will glow under UV light. Each horn size has been designed for the best aesthetic (they are NOT simple scaled down versions of each other) so smaller horns may have fewer rotations. Tan coloured model shown against horns is a TT Pony Mare (smaller than Micro Mini), see photos for a comparison against a standard Breyer Stablemate model, the TT Pony Mare sports the smallest horn from these sets.
Sizing info:
Set 1 -
Set of five horns measuring approx.:
- 5.5mm - just under 1/4"
- 8mm - 5/16"
- 10.5mm - 7/16"
- 13.5mm - just over 1/2"
- 17mm - 11/16"
- Use a 0.8 - 1mm drill bit to fit these horns.
- Suitable for MM-SM scale horses.
Set 2 -
Set of four horns measuring approx.:
- 20mm - just over 3/4"
- 22mm - 7/8"
- 25mm - just under 1"
- 30mm - 1 3/16"
- Use a 1.5 - 1.8mm drill bit to fit these horns.
- Suitable for SM-LB scale horses.
Set 3 -
Set of three horns measuring approx.:
- 34mm - just under 1 3/8"
- 39mm - 1 9/16"
- 45mm - 1 3/4"
- Use a 2.4 - 2.6mm drill bit to fit these horns.
- Suitable for Classic scale horses.
Set 4 -
- Set of two horns measuring approx.:
- 50mm - just under 2"
- 55mm - 2 3/16""
- Use a 2.4 - 2.6mm drill bit to fit these horns.
- Suitable for Traditional scale horses.
Full Set -
- A total of 14 Unicorns horns in all of the sizes listed above, in your choice of material.
Make your selection from the drop-down menus to see prices. Individual sets are all £12, the Full Set is £40 in any material.
Average lead time 0-2 weeks