Brand new for 2024 - Water clear 3D printed resin unicorn horns!

Please excuse the photos, it's been a very dark day here and I've struggled with of these tricky-to-photograph horns!

These Unicorn Horns are 3D printed on a Formlabs Form3 3D printer, in a resin mixture designed to give excellent clarity and strength for their sizes - these are the toughest unicorn horns to date!  Though please note they are not totally unbreakable, the smallest horn is the most delicate given it's fine size and design.  These are not toys but with correct handling will last for years.

Horns will glow under UV light.  Each horn size has been designed for the best aesthetic (they are NOT simple scaled down versions of each other) so smaller horns may have fewer rotations.  Photos show a Micro Mini Maxi Cob, Venti Scale Ragnar, Classic Scale Lady Anne and Traditional Scale Sigurd for scale illustrations, please refer to the measurements below for actual sizes.

These horns are supplied unpainted, with a slightly frosted finish, they can be painted in the same way as any resin model.  You can use a glossy sealer for a more glass-like effect.  All clear resins will yellow over time if not protected from UV light.  Clear UV blocking sealers are available and are recommended to ensure your unicorn horns keep their magical clarity, you can even add a tiny amount of iridescent pearl pigment for added mystical magic!

Sizing info:

Set 1 - 

Set of five horns measuring approx.:

• 5.5mm - just under 1/4"
• 8mm -  5/16"
• 10.5mm -  7/16"
• 13.5mm - just over 1/2"
• 17mm - 11/16"
• Use a 0.8 - 1mm drill bit to fit these horns.
• Suitable for MM-SM scale horses.

Set 2 -

Set of four horns measuring approx.:

• 20mm - just over 3/4"
• 22mm - 7/8"
• 25mm - just under 1"
• 30mm -  1  3/16"
• Use a 1.5 - 1.8mm drill bit to fit these horns.
• Suitable for SM-LB scale horses.

Set 3 -

Set of three horns measuring approx.:

• 34mm - just under 1  3/8"
• 39mm -  1  9/16"
• 45mm -  1  3/4"
• Use a 2.4 - 2.6mm drill bit to fit these horns.
• Suitable for Classic scale horses.

Set 4 -

• Set of two horns measuring approx.:
• 50mm - just under 2"
• 55mm - 2  3/16""
• Use a 2.4 - 2.6mm drill bit to fit these horns.
• Suitable for Traditional scale horses.

Full Set - 

• A total of 14 Unicorns horns in all of the sizes listed above, in your choice of material.

These water clear Unicorn Horns are supplied in handy floating-frames, to keep them safe during transit and easy to find.  Once used, the frame can be used to display small items, please reuse or recycle.

Make your selection from the drop-down menus to see prices.  Individual sets are all £12, the Full Set is £40 in any material.

Average lead time 1-3 weeks